Approval/Certificate/Document of Conformity

ANNEX TO KEMA-KEUR CERTIFICATE 71-100294 page 3 of 3
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The Netherlands
T [phone] F [phone] www.dekra-certification.com Company registration 09085396
Product data – type WTL 6/4 FF
Rated insulation voltage
:
800 V
Rated impulse withstand voltage
:
8 kV
Con
ventional free air thermal current
:
41 A
Rated cross
-
section
:
6 mm²
Rated connecting capacity
:
1,5 mm²
-
6 mm² flexible
Torque clamping unit
:
1,2 Nm
Method of mounting
:
top hat rail 35 mm
Description
:
test disconnect terminal block with screw
-
type clamping units,
1-pole, with 2 clamping units per pole
Product data – type WTQ 6/1
Rated insulation voltage
:
500 V
Rated impulse withstand voltage
:
6 kV
Conventional free air thermal current
:
41 A
Rated cross
-
section
:
6 mm²
Rated
connecting capacity
:
0,5 mm²
-
10 mm² rigid
0,5 mm² - 10 mm² flexible
Torque clamping unit
:
1 Nm
-
1,6 Nm
Method of mounting
:
top hat rail 35 mm
Description
:
terminal block with screw
-
type clamping units,
1-pole, with 2 clamping units per pole
Product data – type WTQ 6/1 STB
Rated insulation voltage
:
500 V
Rated impulse withstand voltage
:
6 kV
Conventional free air thermal current
:
41 A
Rated cross
-
section
:
6 mm²
Rated connecting capacity
:
0,5 mm²
-
10 mm² rigid
0,5 mm² - 10 mm² flexible
Torque clamping unit
:
1 Nm
-
1,6 Nm
Method of mounting
:
top hat rail 35 mm
Description
:
terminal block with screw
-
type clamping units,
1-pole, with 2 clamping units per pole
TESTS
Test requirements
EN 60947-7-1:2009
Test result
The test results are laid down in DEKRA test file 221551600.
Conclusion
The examination proved that all requirements were met.
Factory location
Weidmüller Interface GmbH & Co. KG
Klingenbergstrasse 16
32758 Detmold, Germany