Document of Conformity

ManualsBrandsWeidmueller Manuals1-tierWPE 2.5/1.5/ZR

This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document,

which is retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

Certificate No. 93/20003 (E5)

Issue Date 11 July 2018

Expiry Date 29 June 2023

Sheet 1 of 2 Thorsten Wolff

Hamburg Technical Support Office

Lloyd’s Register EMEA

71 Fenchurch Street, London EC3M 4BS

Lloyd's Register EMEA

Is a subsidiary of Lloyd's Register Group

Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to

in this clause as the 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense

caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant

Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and

conditions set out in that contract.

Type Approval Certificate

This is to certify that the undernoted product(s) has/have been tested with satisfactory results in accordance with the

relevant requirements of the Lloyd’s Register Type Approval System.

This certificate is issued to:

PRODUCER

Weidmüller Interface GmbH & Co. KG

Klingenbergstraße 16

32758 Detmold

Germany

DESCRIPTION Terminal blocks

TYPES WPE 2,5N; WPE 1,5/ZZ; WPE 2,5/1,5/ZR

for mounting rails TS35

Insulation material: Wellamid in all colours

APPLICATION Marine, offshore and industrial applications for use in environmental

categories ENV1, ENV2, ENV3 and ENV4 as defined in Lloyd’s Register’s

Type Approval System, Test Specification Number 1-1990, Print Edition 2.

STANDARDS EN 60947-7-2 : 2010

UL 94 6

Ed. March 2013

RATINGS

Type

Voltage

AWG

WPE 2.5N

500V AC

2.5

WPE 1.5/ZZ

500V AC

2.5

WPE 2.5/1.5/ZR

500V AC

4.0

LR031.1.2013.12

Lloyd's Register EMEA

Thorsten Wolff

Hamburg Technical Support Office

Summary of content (2 pages)

PAGE 1
Type Approval Certificate This is to certify that the undernoted product(s) has/have been tested with satisfactory results in accordance with the relevant requirements of the Lloyd’s Register Type Approval System. This certificate is issued to: PRODUCER Weidmüller Interface GmbH & Co.
PAGE 2
PLACE OF PRODUCTION Weidmüller Interface Romania S.R.L. Strada 66 Nr. 8 437345 Tautii Magheraus Romania The Type Approval does not eliminate the need for normal inspection and survey procedures required by the Rules and Regulations. If the specified standards are amended during the validity of this certificate, the product is to be re-approved prior to it being supplied to vessels to which the amended standards apply. The Design Appraisal Document No.