Document of Conformity

IECEx Certificate

of Conformity

Certificate No.: IECEx ULD 14.0005U

Date of issue: 2020-04-20

Page 2 of 4

Issue No: 6

Manufacturer: Weidmüller Interface GmbH & Co. KG

Klingenbergstrasse 16

32758 Detmold

Germany

Additional

manufacturing

locations:

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with

the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was

assessed and found to comply with the IECEx Quality system requirements.This certificate is granted subject to the conditions as set out in

IECEx Scheme Rules, IECEx 02 and Operational Documents as amended

STANDARDS :

The equipment and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found

to comply with the following standards

IEC 60079-0:2017

Edition:7.0

Explosive atmospheres - Part 0: Equipment - General requirements

IEC 60079-7:2017

Edition:5.1

Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

This Certificate does not indicate compliance with safety and performance requirements

other than those expressly included in the Standards listed above.

TEST & ASSESSMENT REPORTS:

A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in:

Test Reports:

Quality Assessment Report:

DK/ULD/ExTR14.0004/00 DK/ULD/ExTR14.0004/01 DK/ULD/ExTR14.0004/02

DK/ULD/ExTR14.0004/03 DK/ULD/ExTR14.0004/04 DK/ULD/ExTR14.0004/05

DK/ULD/ExTR14.0004/06

NL/DEK/QAR12.0052/07