User Documentation

Weidmüller Interface GmbH Co. KG; Klingenbergstraße 16, 32758 Detmold-Germany
WMF 2.5
500 V
24 A
24 A
2.5mm²
0,5 - 4.0 mm²
0,5 - 4,0 mm²
0,5 - 4,0 mm²
0,5 - 2,5 mm²
0,5 - 2,5 mm²
26 - 12 AWG
0,5 - 0,6 Nm
10 +/- 0,5 mm
- Conductor cross section stranded
- Conductor cross section solid
- cross section, American Wire Gauge
- Tightening torque range, terminal screw
- Stripping length
- Conductor cross section flexible
with ferrule
- Conductor cross section flexible
with ferrule
- Rated current with ZQV
- Rated voltage
- Rated current
Technical data according to IEC/EN 60079-15 (non sparking "nA"):
Note:
The creepage and clearance distances were determined in the worst case. (with closed or open clamping
yoke)
If smaller cross sections than the rated cross section are used, the belonging lower current has to be laid
down in the IECEx/EC-Type Examination Certificate of the complete apparatus.
Mounting instructions:
The WMF series is suitable for application in enclosures in atmospheres with flammable gases or
combustible dust. For use in flammable gases these enclosures must satisfy the requirements according to
IEC/EN60079-0 and IEC/EN60079-15. For use in combustible dust these enclosures must satisfy the
requirements according to IEC/EN60079-0 and IEC/EN60079-31.
In combination with other terminal block series and sizes and if other accessories are used, the applicable
creepage and clearance distances shall be met.
Regarding the use of accessories the instructions of the manufacturer must be followed.
- Rated conductor cross section
- Conductor cross section flexible
Version: WMF 2.5 / WMF 2.5 PE 4986715 Index: 00 Date: 06.2016
2