User Documentation

ManualsBrandsWeidmueller ManualsApplication rangeWMF 2.5 FU PE SW

Weidmüller Interface GmbH Co. KG; Klingenbergstraße 16, 32758 Detmold-Germany

Version: Type Order No

WMF 2.5 FU SW * 1162920000

1162930000

WMF 2.5 FU 30-70V SW* 1162940000

WMF 2.5 FU 60-150V SW* 1162950000

WMF 2.5 FU 100-250V SW* 1162960000

1163040000

1163050000

WMF 2.5 FU PE 30-70V SW* 1163060000

WMF 2.5 FU PE 60-150V SW* 1163070000

WMF 2.5 FU PE 100-250V SW* 1163080000

Type Order No

AP WMF 2.5* 1142990000

WEW 35/2* 1061200000

Pluggable* Order No

ZQV 2.5N/2 1693800000

ZQV 2.5N/3 1693810000

ZQV 2.5N/4 1693820000

ZQV 2.5N/5 1693830000

ZQV 2.5N/6 1693840000

ZQV 2.5N/7 1693850000

ZQV 2.5N/8 1693860000

ZQV 2.5N/9 1693870000

ZQV 2.5N/10 1693880000

- Type Wemid

CTI ≥ 600

TS 35/… acc.to DIN EN 60715

* in all colours

Cross-connection

Insulation material:

- Tracking resistance (A) to IEC 60112

INSTALLATION INSTRUCTIONS

& CONDITIONS FOR SAFE USE

Modular TERMINAL Blocks: W- Series

DEMKO 14 ATEX 1389U

IECEx UL 14.0097U

II 3 G Ex nA IIC Gc

Fuse Terminal Blocks: WMF

End bracket

Accessories:

End Plate

WMF 2.5 FU PE SW *

- Flammability class to UL 94

- Operating temperature range

-60°C…+120°C (insulating material limit)

Standards:

EN 60079-0:2012/A11:2013 and EN 60079-15: 2010

IEC 60079-0:2011 Rev. 6

IEC 60079-15:2010 Rev. 4

WMF 2.5 FU PE 10-36V SW *

Terminal rail

WMF 2.5 FU 10-36V SW *

Version: WMF FU 4986622 Index: 01 Date: 06.2016

Summary of content (4 pages)

PAGE 1
Weidmüller Interface GmbH Co. KG; Klingenbergstraße 16, 32758 Detmold-Germany INSTALLATION INSTRUCTIONS & CONDITIONS FOR SAFE USE II 3 G Ex nA IIC Gc Modular TERMINAL Blocks: W- Series DEMKO 14 ATEX 1389U IECEx UL 14.0097U Standards: EN 60079-0:2012/A11:2013 and EN 60079-15: 2010 IEC 60079-0:2011 Rev. 6 IEC 60079-15:2010 Rev. 4 Fuse Terminal Blocks: WMF Version: Type WMF 2.5 FU SW * WMF 2.5 FU 10-36V SW * WMF 2.5 FU 30-70V SW* WMF 2.5 FU 60-150V SW* WMF 2.5 FU 100-250V SW* WMF 2.5 FU PE SW * WMF 2.
PAGE 2
Weidmüller Interface GmbH Co. KG; Klingenbergstraße 16, 32758 Detmold-Germany Technical data according to IEC/EN 60079-15 (non sparking "nA"): Type - Rated voltage WMF 2.5 FU SW * WMF 2.5 FU 10-36V SW * WMF 2.5 FU 30-70V SW* WMF 2.5 FU 60-150V SW* WMF 2.5 FU 100-250V SW* WMF 2.5 FU PE SW * WMF 2.5 FU PE 10-36V SW * WMF 2.5 FU PE 30-70V SW* WMF 2.5 FU PE 60-150V SW* WMF 2.5 FU PE 100-250V SW* - Rated current 6.
PAGE 3
Weidmüller Interface GmbH Co. KG; Klingenbergstraße 16, 32758 Detmold-Germany CONDITIONS FOR SAFE USE: This document should be read carefully before starting installation. Respect the information stated on the certification label of the terminal, e.g. Type/s of protection, gas group and temperature class.
PAGE 4
Weidmüller Interface GmbH Co. KG; Klingenbergstraße 16, 32758 Detmold-Germany Schedule of Limitations: The fuse terminal blocks are suitable for use in enclosures in atmospheres with flammable gases or combustible dust. For flammable gases these enclosures must satisfy the requirements according to IEC/EN 60079-0 and 60079-15. For combustible dust these enclosures must satisfy the requirements according to IEC/EN 60079-31.