User Documentation

Weidmüller Interface GmbH Co. KG; Klingenbergstraße 16, 32758 Detmold-Germany

Version: Order No

WMF 2.5* 1143070000

Type Order No

AP WMF 2.5* 1142990000

WEW 35/2* 1061200000

Pluggable* Order No

ZQV 2.5N/2 1693800000

ZQV 2.5N/3 1693810000

ZQV 2.5N/4 1693820000

ZQV 2.5N/5 1693830000

ZQV 2.5N/6 1693840000

ZQV 2.5N/7 1693850000

ZQV 2.5N/8 1693860000

ZQV 2.5N/9 1693870000

ZQV 2.5N/10 1693880000

- Type Wemid

CTI ≥ 600

INSTALLATION INSTRUCTIONS

& CONDITIONS FOR SAFE USE

Modular TERMINAL Blocks: W- Series

DEMKO 14 ATEX1389 U

IECEx UL 14.0097U

II 3 G Ex nA IIC Gc

Standards:

EN 60079-0:2012/A11:2013 and EN 60079-15: 2010

IEC 60079-0:2011 Rev. 6

IEC 60079-15:2010 Rev. 4

* in all colours and optional with hexagon and six lobe drive

- Tracking resistance (A) to IEC 60112

- Flammability class to UL 94

-60°C…+120°C (insulating material limit)

Modular Terminal Blocks: WMF

TS 35/… acc.to DIN EN 60715

Cross-connection

Accessories:

End Plate

End bracket

Terminal rail

Insulation material:

- Operating temperature range

Version: WMF 2.5 / WMF 2.5 PE 4986715 Index: 00 Date: 06.2016

PAGE 1
Weidmüller Interface GmbH Co. KG; Klingenbergstraße 16, 32758 Detmold-Germany INSTALLATION INSTRUCTIONS & CONDITIONS FOR SAFE USE II 3 G Ex nA IIC Gc Modular TERMINAL Blocks: W- Series DEMKO 14 ATEX1389 U IECEx UL 14.0097U Standards: EN 60079-0:2012/A11:2013 and EN 60079-15: 2010 IEC 60079-0:2011 Rev. 6 IEC 60079-15:2010 Rev. 4 Modular Terminal Blocks: WMF Version: WMF 2.5* Order No 1143070000 Accessories: End Plate End bracket Terminal rail Type Order No AP WMF 2.
PAGE 2
Weidmüller Interface GmbH Co. KG; Klingenbergstraße 16, 32758 Detmold-Germany Technical data according to IEC/EN 60079-15 (non sparking "nA"): WMF 2.5 - Rated voltage 500 V - Rated current 24 A - Rated current with ZQV 24 A - Rated conductor cross section 2.5mm² - Conductor cross section solid 0,5 - 4.
PAGE 3
Weidmüller Interface GmbH Co. KG; Klingenbergstraße 16, 32758 Detmold-Germany Schedule of Limitations: The feed through terminal blocks are suitable for use in enclosures in atmospheres with flammable gases or combustible dust. For flammable gases these enclosures must satisfy the requirements according to IEC/EN 60079-0 and 60079-15. For combustible dust these enclosures must satisfy the requirements according to IEC/EN 60079-31.