User Documentation

392673480000/00/04.2019
You can deactivate individual process steps in a process-
ing operation.
Example: You only want to cut the conductors to length
and crimp them with wire end ferrules, because you want
to mark the conductors directly on the panel at a later time.
The printer process step is not required and can be deac-
tivated.
The process steps of the active devices are taken into con-
sideration in the processing operation. You can recognise
an active device by its coloured frame in the device list.
Figure 8.1 Device list with active devices
► To deactivate a device, tap the device whose process
step is to be deactivated in the processing operation.
The frame is removed. The device is deactivated.
Figure 8.2 Device list with deactivated device
The process step for this device will be skipped in the pro-
cessing operation.
Deactivated devices are not automatically reac-
tivated. Before the next processing operation,
activate all devices that are required for the actual
processing operation, see chapter Activating
process steps in a processing operation.
8 Deactivating a process step