User Documentation

Creating and editing processing lists
2673480000/00/04.201936
6.4 Deleting the processing list
You can delete the processing list in its entirety.
The Delete list menu deletes all projects and
processing orders in the processing list. You can
delete individual processing orders in the Edit
menu, see section Deleting processing orders.
► In the Processing list menu, tap Delete list.
A dialogue box is opened.
► Tap OK to delete the processing list.
6.5 Deleting the processing order
You can delete individual processing orders from the pro-
cessing list.
► Tap the processing order you want to delete.
► Tap Edit.
► Tap Delete.
A dialogue box is opened.
► Tap OK to conrm the deletion.
6.6 Filtering the processing list
You can lter the processing list according to the following
criteria:
– Conductor length [mm]
– Cable colour
– Conductor cross-section
– Projects
– Editing source
– Editing target
You can only lter the processing list in its en-
tirety. Filtering individual processing orders is not
possible.
You can lter the processing list according to one
lter criterion or combine several lter criteria.
► Tap Filter.
Figure 6.2 Filter settings menu
► Select the lter criteria.
► Tap Apply as applicable.
► When you have set all lters, tap Apply.
A dialogue box is opened.
► Conrm with OK to activate the lter.
The lter icon is displayed.
Figure 6.3 Filter icon
6.7 Changing the lter settings
You can recognise a ltered processing list by the lter icon
that is displayed.
Figure 6.4 Filtered processing list
The Filter menu shows which lters are set.
You can change the lter settings.
► Tap Filter.
► Tap on the eld in which you want to change a lter.