User Documentation

Getting to know and setting up the program
2673480000/00/04.201932
Figure 5.6 Editing settings
Dening a waiting time after a processing order
You can dene how many seconds after completion of a
processing order the program starts the next processing
order.
► Tap System information.
► Tap Settings.
► In the Waiting time after processing order text box,
enter the number of seconds until the next processing
order starts.
► Tap Apply.
Setting the automatic process ow
If the automatic process ow is set, the program starts the
next processing order immediately after completion of a
processing order.
► Tap System information.
► Tap Settings.
► Tap Automatic process ow.
► Tap Apply.
Figure 5.7 Automatic processing flow view
Deleting data after the end of the processing order
You can specify that the program deletes the data of the
processing order after each completed processing order.
If the Delete data after end of processing order box is
ticked, the processing order is deleted from the processing
list as soon as it is fully completed.
► Tap System information.
► Tap Settings.
► Tap Delete data after the end of the processing order
► Tap Apply.
Only if the Delete data after end of processing
order box is ticked can you check, for example,
how far the processing order was worked through
after the program terminated. You can continue
the processing order. If the Delete data after end
of processing order box is not ticked, the pro-
cessing order must be restarted.
Dening the number of pre-printed markers
You can have markers pre-printed to minimise waiting
times.
► Tap System information.
► Tap Settings.
► In the text box, enter how many markers you want to
pre-print.
► Tap Apply.
Enabling support access
The Weidmüller Support can provide you faster, if you en-
able them an access to the program.
► Tap System information.
► Tap Settings.
► Tap Enable service access.