User Documentation

232673480000/00/04.2019
Contents
1 About this documentation 24
1.1 Complete documentation 24
1.2 Symbols and notes 24
1.3 Software version 24
2 Safety 25
2.1 Intended use 25
2.2 Personnel 25
3 System overview 26
4 Starting and quitting the program 27
4.1 Starting the program 27
4.2 Quitting the program 27
4.3 Navigation 27
5 Getting to know and setting up the program 28
5.1 Processing list 29
5.2 System information 30
5.3 Conguringthenetworksettings 31
5.4 Obtainingnetworksettingsautomatically 31
5.5 Setting the port 31
5.6 Changing the language 31
5.7 Deningsettings 31
5.8 Setting printers 33
5.9 Displaying information 33
5.10 Saving the log 33
5.11 Changing the USB setting 34
5.12 Updatingthermware 34
6 Creating and editing processing lists 35
6.1 Importing a processing list from the planning software 35
6.2 Adding a new processing order 35
6.3 Editing the processing list 35
6.4 Deleting the processing list 36
6.5 Deleting the processing order 36
6.6 Filtering the processing list 36
6.7 Changingtheltersettings 36
6.8 Cancellingtheltersettings 37
7 Starting a processing order 38
8 Deactivating a process step 39
9 Activating a process step 40
10 Operating WPC as a stand-alone solution 41
10.1 Activating the stand-alone mode 41
10.2 Deactivating the stand-alone mode 41
11 Glossary 42
Manufacturer
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
32758 Detmold, Germany
T [phone]
F [phone]
www.weidmueller.com
Document no. 2673480000
Revision 00/April 2019