Approval/Certificate/Document of Conformity
Job Id: 262.1-024252-2
Certificate No: TAA000016Z
Revision No: 3
Form code: TA 251
Revision: 2016-12
www.dnvgl.com
Page 4 of 4
Tests carried out
Applicable tests according to Class Guideline DNVGL-CG-0339, Edition November 2016.
Applicable tests according to DIN EN 60945:2015-11:
Salt mist test: Not tested - MaxGuard should be installed in a suitable enclosure (electrical cabinet, panel,
console) protected against salt mist.
Acoustic Noise and Signal test: Not tested - MaxGuard modules have no acoustic signals and have no
audible components.
Marking of product
The products to be marked with:
manufacturer name
part name / part no.
serial no.
HVN no.
Periodical assessment
The scope of the periodical assessment is to verify that the conditions stipulated for the type are
complied with, and that no alterations are made to the product design or choice of systems, software
versions, components and/or materials.
The main elements of the assessment are:
Ensure that type approved documentation is available
Inspection of factory samples, selected at random from the production line (where practicable)
Review of production and inspection routines, including test records from product sample tests and
control routines
Ensuring that systems, software versions, components and/or materials used comply with type
approved documents and/or referenced system, software, component and material specifications
Review of possible changes in design of systems, software versions, components, materials and/or
performance, and make sure that such changes do not affect the type approval given
Ensuring traceability between manufacturer’s product type marking and the type approval certificate
Periodical assessment is to be performed at least every second year and at renewal of this certificate.
END OF CERTIFICATE