Approval/Certificate/Document of Conformity

Job Id: 262.1-021596-1
Certificate No: TAA00001DM
Form code: TA 251
Revision: 2016-12
www.dnvgl.com
Page 3 of 4
1478990000
WEW 35/1 V0 GF SW
12113 11
-
1193160000
CH20M BUS-AP LI TS 35X7.5 &
15
1854972 2
-
1193170000
CH20M BUS-AP RE TS 35X7.5 &
15
1854972 2
-
1248150000
CH20M BUS-PROFIL TS
35X7.5/250
1854972 2
-
1248160000
CH20M BUS-PROFIL TS
35X7.5/500
1854972 2
-
1248170000
CH20M BUS-PROFIL TS
35X7.5/750
1854972 2
-
1248180000
CH20M BUS-PROFIL TS
35X15/250
1854972 2
-
1248190000
CH20M BUS-PROFIL TS
35X15/500
1854972 2
-
1248210000
CH20M BUS-PROFIL TS
35X15/750
1854972 2
-
Application/Limitation
The Type Approval covers hardware listed under Product description.
When the hardware is used in applications to be classed by DNV GL, documentation for the actual
application is to be submitted for approval by the manufacturer of the application system in each case.
Reference is made to DNV GL RU SHIP Pt.4 Ch.9 Sec. 1.
Vibration location class A for modules starting with ACT20C*, CH20M*
Vibration location class B for modules starting with ACT20P*, WEW35/1 V0GF SW
Minimum Standard-Magnetic-Compass safe distance: 5m.
Minimum Steering-Magnetic-Compass safe distance: 5m.
The installation instructions are to be observed.
Product certificate
If specified in the Rules, ref. Pt.4 Ch.9 Sec.1, the control and monitoring system in which the above
listed hardware is used shall be delivered with a product certificate. For each such delivery the
certification test is to be performed at the manufacturer of the application system before the system is
shipped to the yard. The test shall be done according to an approved test program. After the certification
the clause for application software control will be put into force.
Clause for application software control
All changes in software are to be recorded as long as the system is in use on board. The records of all
changes are to be forwarded to DNV for evaluation and approval. Major changes in the software are to
be approved before being installed in the computer.
Type Approval documentation
Tests carried out
Applicable tests according to Class Guideline DNVGL-CG-0339, Edition November 2016.
Acoustic Noise and Signal test: Not tested – Current Monitor Modules have no acoustic signals and have no
audible components.
Marking of product
The products to be marked with: