User Documentation
25
7=6<260
Die The analogue signal isolators are mounted on standard TS 35 rails.
4.,<:2,*4,766.,<276
(*:6260 For applications with high isolation voltages, take measures to
prevent accidental contact and make sure that there is suffi-
cient distance or insulation between adjacent devices!
%.,162,*4*<*
Supply voltage 18 ... 30 Vdc/approx. 1 W
Operating temperature 0 °C ... +55 °C
Voltage supply via cross-connections. Operating carrying capacity of
cross-connection ^ 2 A (see Cat. No. point 7)
%.:526*4*;;2065.6<;
1 +15 V power supply for sensor
2 Input PNP
3 Input NPN / Namur
4 Input GND
5 Output (0...10 V; 0/4...20 mA)
6 Output GND
7 Supply voltage + 24 Vdc (cross-connected)
8 Power supply GND (cross-connected)
Wire cross-section max. 2.5 mm
2
Multi-wire conncection max. 1 mm
2
(two wires with same cross-section)
6
7
1
2
8
3
4
5
\