User Documentation

34 1171340000/04/08.16
Input for the combination of the suppression diode
In additionally to the standard values, uni- or bipolar diode versions are
selected too.
This is done by assigning a "1" for a unipolar diode and a "0" for a
bipolar diode. The user confirms the entered data via the [OK]-button.
Summary
Then a final page is shown and the entered values can be checked
again.
In the first step the voltage values are shown.
(GDT = Gas Discharge Tube,
VDR = Voltage Dependent Resistor = Varistor,
TVS = Transient Voltage Suppression)
Pushing the [OK]-button, the next step is shown. Here are the combinations shown with x and y.
By pressing the [OK]-button the next screen appears.
During the input of values or combination is wrong you can abort the input
with the [ESC]-button.
By pressing [OK] the values will be confirmed and shown in the display.
Combination Display Value
0-0 – No part build in
x-y xy
Part belongs to x and y
 valid combination
Table 2 Description of combinations