User Documentation
7.3 Commissioning the UR67 module
▶ Start the SIMATIC Manager.
▶ To set up a new project, click File/New.
The “New Project” window opens.
▶ Enter a name for the new project (e.g. UR67_Station1)
and click OK.
The new project is displayed in SIMATIC Manager.
Creating a new project
Adding a control unit type
▶ Select the project in SIMATIC Manager.
▶ Select the control unit type VIA Insert/Station
(e.g. SIMATIC 300).
Adding a station
▶ Double-click on the project name so that the station
(SIMATIC 300) is displayed below in the directory tree.
▶ Click on the station (SIMATIC 300).
▶ Double-click Hardware on the right-hand side of the
window.
The “Hardware Conguration” window opens.
Hardware configuration
▶ The device catalogue is displayed on the right-hand side
of this window. If this does not occur, open the catalogue
via View/Catalogue.
Adding a prole rail
▶ In the catalogue, choose the profile rail (e.g. SIMATIC
300/RACK-300).
Choosing a profile rail
▶ Double-click on the profile rail or drag it to the left-hand
side of the window using the mouse.
7 Commissioning | Commissioning the UR67 module
382484950000/00/03.2016 Manual UR67-PROIFBUS