User Documentation
Connecting the web server and getting startet | Starting the web server
5u-remote web server manual2112220000/05/01.2018
NewUSBinterfaceintheDeviceManager
▶ Using the mouse, right-click on the interface and select
“Update driver software”.
You will be asked if you would like to search for the driver
software.
▶ Select the option “Search for driver software on this com-
puter”.
Searching for installation files on the computer
▶ Click on “Browse” and select the folder in which you have
stored both .inf files.
There could possibly be a security enquiry because the driver
software does not have a signature. Nonetheless, continue
with the installation.
▶ Follow the rest of the steps in the installation routine until
the successful installation is confirmed.
The driver will now appear in the Device Manager under
“Network adapters”.
▶ Close the Device Manager.
2.3 Starting the web server
The u-remote station must be completely assembled and
supplied with voltage.
▶ Connect the PC to the coupler using a USB cable. The
USB socket at the coupler can be found behind the ser-
vice flap on the front side.
▶ Open one of the browsers listed in section2.1
▶ In the address line, enter the IP address of the coupler
(default: 192.168.1.202, UR20-FBC-EIP: 192.168.5.202).
The web server is started. The connected station is displayed
with all of its active modules. In the event that the web
server will not start, please check the IP address (see sec-
tion9.2).
You can also call up the web server via HTTPS
(see section 3.8).