User Documentation
24 2112220000/05/01.2018u-remote web server manual
▶ Download the latest firmware file for each component
you want to update from the Weidmüller website to your
local PC.
Firmware les for eldbus couplers have the extension
“.bsc”. For PROFINET couplers, for instance, the le might be
named FBC-PN-IRT-00XX.bsc. The compatibility is checked
during uploading the coupler rmware. Thus it is not possi-
ble to load a incompatible coupler rmware.
Firmware les for modules have the extension “. bsm”. You
can determine for each module separately whether an up-
date shall be proceed.
– A rmware update cannot be undone. The old
rmware in the coupler/module is overwritten.
– While uploading the firmware files you cannot
access to the station via the web server.
– Make sure, that while uploading the firmware
files
– the power supply will not be interrupted,
– no modifications are carried out on the
u-remote station!
▶ To carry out a firmware update, click on “Firmware“ on
the meue bar.
Menue firmware update
All components having their own rmware are displayed
with a release information.
Updatingfirmware
Single update
▶ If you want to update the firmware of a single component
(e.g. only the coupler), click on “Select firmware” beside
this component.
▶ Select the firmware file from the storage location on your
PC and click on “Open”
▶ Click on “Update now“.
The rmware is updated. Once the data has been trans-
ferred, you are asked to restart the coupler.
▶ Click on “Reset”.
▶ Wait until the coupler has been restartet and the station
view is displayed in the web server.
Multiple update
If you want to update several components, use the multiple
update.
▶ Click on “Multiple update” and then on “Select firmware”.
▶ Chose subsequently all files you want to update.
Firmware files for multiple update
▶ You can deselect single components by clicking on the
checkmark. These components will not be updated.
▶ You can delete each single file in the overview by clicking
on the red and white cross.
▶ After selecting all desired files and chosing the compo-
nents where required click on “Update now”.
8 Updatingrmware