User Documentation
Web server in force mode | Ending/deactivating force mode
23u-remote web server manual2112220000/05/01.2018
Detail view of the station in force mode
All active modules are displayed in the overview. The switch-
able channels are provided with a changeover switch.
▶ To see all channel details, click on “Show all“.
▶ To see only the first value of each channel, click on “Hide
all“.
Filtering the module view
If you only want to see the modules that you would like to
force, use the lter function.
▶ Click on the plus symbol besides “Filter“.
▶ By clicking on a module in the filter bar, the respective
module is displayed or removed from the overview
beneath.
Filtering the displayed modules
Displayed modules are highlighted grey in the lter bar, while
hidden modules are displayed in white.
Display with filter set
Resettinglters
▶ To display all modules again, click “All”.
▶ To hide all modules, click “None”.
Forcing channels
Depending on the module type you can force channels di-
rectly either by clicking on the switch or typing in a value.
▶ Enter the desired modifications.
Each change is marked with a green symbol until it will be
applied. All changes will only be saved after you click on “Ap-
ply changes“. All changes will be undone after you click on
“Restore“
▶ After making your modifications click on “Apply changes“
to start forcing.
Changes will be transferred to the coupler, the green mark-
ings will be removed.
7.4 Ending/deactivating force mode
▶ To cancel a forced operation, click on “Force“ and “Disa-
ble“.
Deactivating force mode
The station is reset to the state it had before the force mode
has been started.