User Documentation

Web server in force mode | Forcing via the station view
22 2112220000/05/01.2018u-remote web server manual
7.2 Forcing via the station view
▶ Click on the channel to be forced.
Dependent on the module type there are different options:
▶ To switch an output, click on the switch and then on
“Force“.
Forcing an output
▶ To force counter values, type in the force values and click
on “Force“.
Forcing of modules with registers
▶ To force status or control registers (e.g. with counter mod-
ules or PWM modules), click on the corresponding entry.
Forcing registers
▶ Set or remove the arrow for each register to be forced
and click on “Apply changes“.
▶ Click on “Force“.
The changes are transferred to the coupler.
7.3 Forcing via the detail view
For a better survey change to the detail view. In this view
modules can be fade out and in, which is helpful, especially
when working with larger stations.
▶ Click on “Force“ and “Station“.
Switching to detail view in force mode