User Documentation

16 2112220000/05/01.2018u-remote web server manual
▶ Open the module component view.
Module component view
Here you can:
– Query general information about the module
– Access and change the module parameters
– Query information about certain channels
– Access the data sheet of the module (link “Ordering
data“)
The module settings are only accessible when
force mode is not active.
Parameters can only be written when the eld
bus is not active.
5.1 Displaying and editing parameters
▶ Open the module component view.
▶ Click on “Parameter“ (for the module and/or for certain
channels).
The parameters are displayed.
For parameters that can be edited, you can enter the
changes in the entry elds or choose alternative settings
from a dropdown menu.
Displaying and editing module parameters
▶ Enter the desired modifications.
Each change is marked with a green symbol until it will be
applied. All changes will only be saved after you click on “Ap-
ply changes“. All changes will be undone after you click on
“Restore“
▶ After making you modifications click on “Apply changes“.
Changes will be transferred to the coupler, the green mark-
ings will be removed.
5 Module settings