User Documentation

Congurationandstationdata| Saving or opening a L5X le
24 2112220000/06/01.2021u-remote web server manual
Saving or loading a customisation file
▶ To save station parameters and channel names, click
Save.
You can open the le or save it on your computer.
▶ To load station parameters and channel names, click
Load.
▶ Navigate to the desired file on your computer and click
Open.
Station parameters and channel names are loaded into the
coupler and displayed in the web server.
8.4 SavingoropeningaL5Xle
This function is only available for the
UR20-FBC-EIP coupler.
Via the hardwarecongle(.l5x) function, you can save the
module conguration of the u-remote station in a L5X le.
You can then import the le as a routine into the Studio 5000
Rockwell software.
▶ In the menue bar, click Extras/Hardware config file
(.l5x).
Menue Extras/Hardware config file (.l5x)
You can open the le or save it on your computer.
8.5 Displaying process data
▶ Click Station data/Process data.
Menue Station data/Process data
The overview displays the channels of all modules each with
its rst value.
Display of process data
▶ Click Show all to see the entire overview with all values.
The values are continuously updated.
8.6 Displaying diagnostic data
▶ Click Station data and then Diagnostic data.
Menue Station data/Diagnostic data
The overview displays all current diagnostic messages. Com-
ponents without diagnostic message are not displayed.