User Documentation

Introduction
System manual
2696790000/02/04.2020
9
1 Introduction
1.1 Purpose of the document
This document describes the structure of u-control.
In addition, it describes the assembly and installation, the wiring aswell as
the operation and displays of the modules.
The installation and configuration is described enough to obtain an opera-
tionally ready system. "Ready for operation" means that the system and/or
the respective CPU modules are ready for loading the customer application.
Information
This manual is not addressed to end customers! Necessary safety notes for
the end customer have to be taken into the customer manual in the respec-
tive national language by the mechanical engineers and system providers.
1.2 Requirements
The system manual is written for everyone using a u-create studio system in
comination with a UC20-SL2000-EC or UC20-SL2000-EC-CAN or who plan
to use such a system.
Only electricians trained pursuant to VDE 1000-10 are allowed to install and
service a system with the help of this system manual.
Target group Requisite knowledge and abilities
Safety engineer for
"Functional Safety"
Basic technical training (technical college, engineer training or corre-
sponding professional experience).
Knowledge of:
● Principles of functional safety
● All current standards and safety regulations for the machine/
plant, in particular also knowledge of validation conforming to
EN ISO 13849-2.
● Special risk potential of the machine/system and the production
process
● Specific protective measures to avert machine-specific hazards
(based on hazard and risk analysis)
● In-depth knowledge of national accident prevention regulations.
Project engineer
Technical basic education (advanced technical education, engineer-
ing degree or corresponding professional experience),
Knowledge of:
● The method of operation of a PLC,
● Current valid safety information,
● The application.