User Documentation

Configuration
60
In the part "Advanced" you can find further parameters of the CAN bus in a
tree structure. For normal operation this parameters need not to be changed.
Tab "Status"
Various analysis parameters are shown here, which provide information
about the CAN bus of a running control.
Element Meaning
Status Status information
Message Send Count Number of sent data
Message Receive Count Number of received data
Bad Send Count Number of defective sent data
Bad Receive Count Number of defective received data
Baudrate Baudrate (kBaud)
Message Filter Count Number of filtered data
Tx Error Level Tx-error counter (Transmit)
Rx Error Level Rx-error counter (Receive)
Bus Status Bus status
Sent Data Bytes Sent data bytes
Received Data Bytes Received data bytes
Error Frame Count Number of error frames
Error Warning Count Number of warnings
Error Passive Count Number of error passive
Bus Off Count Number of bus offs
Data Overrun Count Number of data overruns
15.4.2 Configuring CAN Master
To configure the device as CAN Master (Adding the function CANopen Mas-
ter), proceed as follows:
1) Open the context menu of a CAN interface and select ► Add de-
vice ....