User Documentation

Create and execute the simulation of a control
34
Name Beschreibung
Description
An additional information that can help when managing simula-
tions.
Optional Packages
The optional PLC packages which should be used can be se-
lected in the following dialog.
Location
● Managed by simulation service: with this option the created
simulation will be stored in a directory on the machine
where the service is hosted.
● Local storage path: a local path can be set where the new
simulation will be stored. Nevertheless a local simulation
service is necessary to run a local simulation.
A local simulation will only be visible in the u-create studio
in Manage Simulations if the simulation is running.
Build settings
Depending on the used devices and features in the project will
be the build settings available.
The simulation will be created via Create.
10.2 Execute simulation
The button Manage Simulations in the toolbar opens the following dia-
log.
Fig.10-20: Dialog for managing simulations
The list in that dialog shows all simulations from the simulation service. The
buttons in the ribbon can be used for the following actions.
Name Beschreibung
Start
Starts the selected simulation. This simulation is then available
in the communication settings.
Stop Stops a running simulation.
Create Opens the dialog for simulation creation.
Clone Creates a copy of the selected simulation.
Rename
Changes the name of the simulation. This name will also be
used for the PLC name which is visible in the communication
settings.