User Documentation

Loading project on control

6 Loading project on control

With u-create studio the project can be downloaded to a control. For the on-

line option, you need to establish a connection to the running control first.

6.1 Establishing Connection PC - Control

Double-click on the node of the control in the project tree to open the editor

with the configuration of the control. There is also an individual "Communica-

tion Settings". A connection to the control can be created there.

Fig.6-7: Communication settings

Fig.6-8: Tool bar of the communication settings

1 ... Add new device 2 ... Search network

3 ... Make device active 4 ... Configure device

5 ... Remove device

Direct connection PC - control

To establish a connection the PC must be plugged into the control.

Proceed as follows:

1) Click on "Scan" on the tool bar to start the automatic search run which

searches the network for devices. Found controls are added to the area

"Available Controls".