User Documentation

Page 71
Disconnect from the selected Router /
remote network (Step 7)
(Finish the remote access session)
➢ First close all active sessions or programs
which are accessing IP addresses of the remote
network.
➢ Click button ‘Disconnect’.
▪ Now you will have the previous status that
both the Service PC and the Router are still
connected to the u-link VPN server but you
have no longer a pass-through connection.
➢ Select the Router item and click ‘Disconnect
VPN Router ↔ u-link’ to shutdown the Routers
VPN tunnel.
5.2 Closing the remote access session
Chapter 5 – Initiating a remote access to remote LAN devices
Step 1: Close the VPN pass-through connection of
the Service PC to Router / remote network
(Use one of the 2 options).
Step 2: Shutdown the Router VPN
connection to the u-link VPN server.
Status 3: New Router status
after VPN shutdown showing
an active WWH connection.
Copyright © 2020 Weidmüller Interface GmbH & Co. / All rights reserved. Reproduction without permission is prohibited.V1.5.1 / Oct, 2020