User Documentation

Page 69
Initiate a pass-through connection
between Service PC and remote Router
(Step 5)
➢ Click button ‘Connect VPN PC ↔ u-link ↔
Router’ to establish a pass-through
connection between Service PC and the
Router.
▪ A successful pass-through connection is
displayed in section ‘Connection Status PC’
containing following information:
▪ Connected to: Name of the selected
accessible Router / remote network.
▪ Accessible remote network: IP range of
accessible remote network.
▪ Router VPN IP: Additional VPN-IP address
of the Router beside LAN/WAN IP’s. Exists
as long as the pass-through connection is
established. Via this VPN-IP the Router’s
Web interface also is accessible.
▪ Routing to remote network: Status ‘active’
means that the Service PC has accepted
an additional setting in its routing table how
to access devices at the remote network.
5.1 Starting a remote access session
Chapter 5 – Initiating a remote access to remote LAN devices
Click button to start a pass-through
connection between Service PC and Router.
Established pass-through connection
between Service PC and Router.
Changed Router icon
signalizing a pass-
through connection to
this Service PC
Copyright © 2020 Weidmüller Interface GmbH & Co. / All rights reserved. Reproduction without permission is prohibited.
Now the remote devices (any IP address) connected
to LAN port of remote Router can be accessed.
V1.5.1 / Oct, 2020