User Documentation

Page 68
Start the Router VPN connection remotely
via Web-Portal (Step 4)
▪ The VPN connection of the Router to the u-link
VPN server can be activated via WWH
communication. The permission to activate the
Router VPN tunnel remote via u-link Portal can
be set or prohibited in menu ‘u-link’ of the
Routers Web interface (default allowed).
➢ Select the Router by clicking on the Router
object (Icon or name) to display the object
parameters (Properties, Actions, …)
➢ Start the VPN connection by clicking button
‘Connect VPN Router ↔ u-link’ (Section
Actions).
▪ Now a ‘VPN activate command’ will be sent
to the Router via WWH connection.
▪ Wait around 30…40 seconds then the new
status ‘Connected’ will be displayed.
▪ Finally both the Service PC and the Router are
connected to the u-link VPN server but no pass-
through connection via the u-link VPN server is
established until now.
5.1 Starting a remote access session
Chapter 5 – Initiating a remote access to remote LAN devices
Status Router before clicking
‘Connect VPN Router ↔ u-link’
• Active WWH communication to u-link
• No VPN connection
Status Router after clicking
‘Connect VPN Router ↔ u-link’
• Active WWH communication to u-link
• VPN connection to u-link VPN server
established
Copyright © 2020 Weidmüller Interface GmbH & Co. / All rights reserved. Reproduction without permission is prohibited.V1.5.1 / Oct, 2020