User Documentation

Page 66
Goto menu Service Desk (Step 2)
▪ In section ‘Device Topology’ the same
defined objects are displayed which
previously have been created in menu
‘Device Management’.
▪ In section ‘Connection status PC’ the
current VPN connection status (of this
PC) to the u-link VPN server is
displayed.
▪ In the ‘Device Topology’ the current
connection status of a Router is
signalized by following different icon
symbols:
5.1 Starting a remote access session
Chapter 5 – Initiating a remote access to remote LAN devices
Status Router:
• Connected to u-link via WWH communication
• No VPN connection
Status Service PC (u-link VPN client):
• Not connected to u-link
Copyright © 2020 Weidmüller Interface GmbH & Co. / All rights reserved. Reproduction without permission is prohibited.V1.5.1 / Oct, 2020
The Router has no connection to u-link.
• Device not configured to use u-link or
• Device is powered off or
• Device has no Internet access.
The Router has an online connection to
u-link WWH server.
The Router has an active VPN
connection to the u-link VPN server.
The Service PC has a pass-through VPN
connection via the Router to its LAN
network.
For initiating a remote access session the Router
must have at least one of these both states.