User Documentation

Page 59
Activate the Router for u-link (Step 10)
➢ Goto menu Configuration → VPN → u-link
(Tab ‘Configuration’).
➢ Enable checkbox ‘Enable u-link instance’.
➢ Use default values of section ‘VPN connection
settings’.
➢ Enable checkbox ‘Use a system wide HTTP
proxy’ if the Router Internet access is passing a
Proxy Server.
▪ Note: If the checkbox will be enabled the
Proxy server settings must be configured as
described previously.
➢ Use default settings of the other parameters.
➢ Click button ‘Apply settings’.
4.6 Configuration of the Router
Chapter 4 – Setup of a remote access scenario (Configuration Router)
Router Web interface (Menu u-link)
Screenshot of the enabled u-link
instance.
Note:
Settings of u-link parameters are
described on the next slide.
Copyright © 2020 Weidmüller Interface GmbH & Co. / All rights reserved. Reproduction without permission is prohibited.V1.5.1 / Oct, 2020