User Documentation

Page 63

Save the Router configuration (Step 13)

➢ Go to menu System → Save.

▪ If you have changed and applied any settings then in

each menu a flashing disk icon is displayed,

indicating that the applied settings not yet are saved

to the flash memory. By clicking on the disk icon the

menu ‘Save’ directly will be opened.

➢ Click button ‘Save settings’ to store the configuration in

the non-volatile memory.

4.6 Configuration of the Router

Chapter 4 – Setup of a remote access scenario (Configuration Router)

Status:

Any parameters are changed

and applied but not saved.

Status:

Current configuration is saved.

No flashing disk icon.

Flashing disk icon

indicates an applied but

not saved configuration.