User Documentation

A6 - Change LAN IP address/netmask of a remote Router via u-link VPN connection

Note:

The connected PC still has the routing entries to

previous Router LAN and WAN IP networks

192.168.1.0/24 and 192.168.99.0/24.

To update the PCs routing table do following:

➢ Disconnect the PC from the remote Router.

➢ Disconnect the Router VPN connection to u-link.

▪ Wait until the Router icon changes to this

symbol:

➢ Connect the Router again to u-link.

▪ Wait until the Router icon changes to this

symbol:

➢ Finally re-connect the PC to the remote Router.

▪ As result the PC’s routing table should be

updated and the new accessible networks

192.168.50.0/24 and 192.168.99.0/24 should

be displayed in the connection status of the

Service desk.

New accessible networks at

Routers LAN/WAN ports

V1.5.1 / Oct, 2020

Appendix 6 – How to change IP address/netmask of Router LAN port via u-link

VPN connection