User Documentation

Mounting and installation
10 1373930000/02/06-2017
4. Mounting and installation
The operating instructions for the SIL3 relay with the
order number
IS SCS 24VDC P1SIL3DS 1345290000
must be made available.
The instructions, constraints and limitations
contained in these instructions must be taken into
consideration when installing and operating the SIL3
relay.
The SIL3 relay should be checked to see if it is
functioning properly before it is first used and after
any wiring change is make. Refer to section 5.1
“Functional check” for more details.
The output circuit is protected with a miniature
device fuse (GS fuse).
The fuse is accessible on the front side of the
housing. It can be swapped out without opening the
housing.
If there is a short circuit, you must make sure that
the cause of the short circuit has been fixed. A
functional test should be carried out after the fuse
has been replaced.