Approval/Certificate/Document of Conformity

Job Id: 262.1-011517-5
Certificate No: TAE00003EY
Form code: TA 251 Revision: 2016-12 www.dnvgl.com Page 2 of 2
Product description
Non-ex terminal blocks of type SAKS and KDKS.
Type
Designation
Current
[A]
Rated
Voltage
[V]
Rated
cross-
section
[mm
2
]
Description
SAKS 2 10 500 10 Fuse terminal block
SAKS 2/35 10 500 10 Fuse terminal block
SAKS 3 10 500 10 Fuse terminal block
SAKS 3/35 10 500 10 Fuse terminal block
KDKS 1 6,3 500 4 Fuse terminal block
KDKS 1/35 6,3 500 4 Fuse terminal block
Manufactured by
Romania
S.C. Weidmüller Interface Romania S.R.L.
Tautii-Magheraus 915/A
437345 Tăuţii-Măgherăuş, Romania
Type Approval documentation
As per tech.-docs. in NPS 262.1-011517-5
Tests carried out
 IEC 60947-7-3 (2002-07) verifying electrical, thermal and mechanical characteristics
 DNVGL Standard for certification, Vibration test, Damp heat test
 IEC 60998-1 (2002-12) and IEC 60695-2-10 (2000-10) Glow-wire test
 IEC 60112 (2003-01) Tracking test
Marking of product
Weidmüller - Type designation - Voltage - Size
Periodical assessment
The scope of the periodical assessment is to verify that the conditions stipulated for the Type approval
are complied with and that no alterations are made to the product design or choice of materials.
The main elements of the assessment are:
 Inspection on factory samples, selected at random from the production line (where practicable)
 Results from Routine Tests (RT) checked (if not available tests according to RT to be carried out)
 Review of type approval documentation
 Review of possible change in design, materials and performance
 Ensuring traceability between manufacturer’s product type marking and Type Approval Certificate.
Periodical assessment is to be performed after 2 years and after 3.5 years. A renewal assessment will be
performed at renewal of the certificate.
END OF CERTIFICATE