User Documentation
2053260000/05/201516
Planning
2.2 Planning guidelines
Planning according to the applicable standards is the basis for trouble-free and
durable operation of the Ethernet network. The execution, along with later use, is
dened here.
• Observe the corresponding DIN regulations (safety, EMC).
• (DIN) EN 50173 is vital for cabling that is not application-specic, and (DIN) EN
50174 is important for communication cables in general.
• Observe the cable's minimum bending radius.
• Use only suitable installation systems.
• It is not permitted to route copper communication cables together with high-
power cables. Comply with the separation spacing as outlined in the EMC
conditions in the environment (see DIN EN50174-2).
• Verify the quality requirements by measuring and logging according to the
standards and using the correct engineering practice.