User Documentation

Installation
2053260000/05/2015
117
Connection instructions
• Do not remove the twist in the pairs of wires any more than
necessary.
• Do not add further twists to the pairs of wires.
• Ensure a closed sheath lm.
c) Connecting RJ45 plug crimp
1 Remove sheath from cable according to assembly
instructions for plug-in connector and strip the
protruding braid to the rear over the cable sheath.
Slide on anti-kink bushing.
2 Guide the cable's individual wires into the pre-
screener according to the chosen pin assignment
(page 116) and trim the protruding ends ush.
3 Now insert the pre-screener into the plug housing. If
necessary, bend the strain relief to the rear and then
to the front again.