Brochure/Catalogue

7
FreeCon – The solution
Weidmüller’s FreeCon junction boxes provide numerous
mounting options so that you can always be sure of getting
the optimum cable route. There are two M4 threaded ttings
on the bottom side which allow the FreeCon junction box to
be screwed on to a oor panel. These threads are also used
for attaching the mounting foot.
This allows the connector to be positioned within a 120°
angle range. The hose package can thus be properly routed
within the range of the the robot's axis 3.
It can also be mounted on the front using four M4 screws.
The cable packet can then be guided through a panel or
a wall, for example. A mounting cut-out is required in such
cases. This installation system is suitable not only for robotics
cabling, but also for other applications which require a
rugged, reliable and pluggable cable solution.