User Documentation

Title: PROtop IO-Link Register Description
2019.11.29, Page 17/17
DocVersion: 1.1
4 Special Functions
4.1 Setting Control of PROtop via IO-Link
The PROtop can be configured to operate at different modes. This can be changed with setting the “Configu-
ration Select” parameter. Every time the parameter is written its necessary to perform a power cycle or exe-
cute the restart command for validation.
The two modes are following:
1) Standard mode: The PROtop will be configured via the potentiometer and the DIP switches. Its not
possible to write parameters except the “Configuration Select” parameter.
2) IO-Link mode: The PROtop will be configured via the IO-Link protocol. The potentiometer and the
DIP switches are disabled.