User Documentation
2639590000/00/11.201816
6.1 Cleaning the machine externally
The machine should be freed of dust on a regular basis.
It must be cleaned externally as and when required.
Cleaning the inside is part of maintenance which
must only be carried out by trained personnel.
► Make sure that the machine is switched o.
► Clean the surface of the machine with a damp cloth. If
necessary, use soap-based cleaning agents. Do not use
any abrasive cleaners or solvents.
6.2 Machine maintenance
In order to ensure fault-free operation, the described main-
tenance tasks (see section 6.3) must be performed at the
specied intervals.
Keep the following ready for maintenance work:
– Allen key set
– Brush and cleaning cloth
– Lubricant
– PTFE oil
– Lubricating grease (suitable for rolling bear-
ings)
6 Cleaning and maintaining the machine