User Documentation

152639590000/00/11.2018
Content
1 About this documentation 16
2 General safety notes 17
2.1 Intended use 17
2.2 Material that can be processed and crimp form 17
2.3 Safety equipment 17
2.4 Personnel 17
3 Device description 18
3.1 Technical data 19
3.2 Type plate 19
4 Transporting and setting up the machine 20
4.1 Installation location 20
4.2 Transporting the machine 20
4.3 Unpacking the delivery 20
4.4 Scope of delivery 20
4.5 Establishing connections 20
5 Operating the machine 15
5.1 Normal operation 15
5.2 Prepare wires 15
5.3 Crimping the wire 15
5.4 Reset the day's piece quantity 15
5.5 Switching off the machine 15
6 Cleaning and maintaining the machine 16
6.1 Cleaning the machine externally 16
6.2 Machine maintenance 16
6.3 Maintenance schedule 17
6.4 Lubricate the crimping unit 18
6.5 Servicing the compressed air maintenance unit 18
7 Troubleshooting 19
7.1 Fault table 19
7.2 Replacing fuses 19
8 Taking the machine out of operation and disposal 20
8.1 Taking the machine out of operation 20
8.2 Disposing of the machine 20
APPENDIX
Electro connection layout 154
Pneumatic connection layout 155
Declaration of conformity 156
Manufacturer
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
32758 Detmold, Germany
T [phone]
F [phone]
www.weidmueller.com
Document No. 2639590000
Revision 00/November 2018