Approval/Certificate/Document of Conformity
File E223527 Vol. 5 Sec. 1 Page 2 Issued: 2017-12-13
and Report
RATINGS:
Electrical:
I/P to isolator 6 to 35Vdc, 4 to 20mA.
O/P from isolator 18 to 32Vdc, 4 to 20 mA
Supply: 18 to 32Vdc, 850mW supply (at 32Vdc)
NOTE: Passive isolator that takes its power from the O/P side of the
device.
Environmental:
Ambient temperature range:
-40 °C ≤ Tamb ≤ +55 °C (70 °C with derating)
Temperature Code: T4
Derating:
- Up to and including 55°C, resistive loads on all terminals in normal
operation considered between 0 to 600 Ω (nominal 24Vdc), (May also be
calculated as Rmax = (Vsupply – 12V) / 0.02A)
- Above 55°C and up to 70°C, minimum resistive loads are as follows:
Ext. voltage Vdc Min. output load Ω
18 50
24 350
28 550
32 750
NOMENCLATURE:
PicoPak- CI- CO- LP- S
I II III IV V
I - PicoPak series
II - CI, current input, 4-20mA
III - CO, current output, 4-20mA
IV - LP, loop powered (takes power from output side of device)
V - S, screw terminals
P, sprung push-in terminals