Document of Conformity

File E223527 Vol. 5 Sec. 1 Page 1 Issued: 2017-12-13

and Report

DESCRIPTION

PRODUCT COVERED:

USL, CNL Open Type Programmable Controllers – PicoPak series, type

PicoPak-CI-CO-LP-x, where x may be S or P, for use in Hazardous Locations,

Class I, Division 2, Groups A,B,C and D.

GENERAL:

These products shall comply with ordinary locations File E141197,

issued date 2017-08-09, Programmable Controllers, covering for this

manufacturer and with the following description. Should the Procedure File

E141197, issued date 2017-08-09 be withdrawn, labeling under this Procedure

must be discontinued until authorization to resume is received. In the case

of any discrepancy between this File and E141197, this file has precedence.

These modules are intended to be used for input / output isolation

purposes. The devices consist of Input / Output Modules with 4-20 mA I/O

functions.

TECHNICAL CONSIDERATIONS (NOT FOR FIELD REPRESENTATIVE’S USE):

Products designated USL have been investigated using requirements

contained in UL121201 Nonincendive Electrical Equipment For Use In

Class I and II, Division 2, and Class III, Divisions 1 and 2 Hazardous

(Classified) Locations - Issue Date 2017/09/15.

Products designated CNL have been investigated using requirements

contained in Canadian Standards CSA C22.2 NO. 213-17, Nonincendive

Electrical Equipment For Use In Class I and II, Division 2 and Class

III, Divisions 1 and 2 Hazardous (Classified) Locations - Edition 3 -

Revision Date 2017/09/15