Brochure/Catalogue

LSF-SMD 5.00/../135
PCB terminal for fully automatic assembly using reflow
soldering (SMD), with PUSH IN wire connections.
Conductor inserted and slider operated in same direction
(TOP).
• Solid wires& stranded wires with wire-end ferrules
need only to be inserted and they are ready.
• When connecting stranded wires without wire-end
ferrules the handling area is used to open the terminal
point
• Intuitive handling – since the wire-entry area and
handling area are clearly separated.
• Packaged in tape-on-reel
• Conductor outlet direction 135°
Technical data
Clamping range, max. mm²
Solid core H05(07) V-U mm²
Stranded H07 V-R
Flexible H05(07) V-K mm²
Flexible with ferrule mm²
Ferrule with plastic collar mm²
Stripping length mm
Screwdriver blade
According to norm
Tightening torque range Nm
Rated current, max. A
At ambient temperature
For conductor cross-section mm²
Overvoltage category
Pollution severity
Rated voltage V
Rated impulse voltage kV
UL / CUL (Use Group)
Rated voltage V
Rated current A
AWG conductor
CSA (Use Group)
Rated voltage V
Rated current A
AWG conductor
General data
Type of insulation material
UL 94 flammability rating
Contact base material
Material of contact surface
0.13...1.5
0.2...1.5
0.2...1.5
0.25...1.5
0.25...0.75
8
In compliance with IEC 60664-1 / IEC 61984
mm
AWG
AWG
17.5 17.5
20°C 40°C
1.5
III III II
3 2 2
250 320 500
4 4 4
B C D
300 300
12 10
24-16
B C D
300 300
10 10
24-16
LCP GF
V-0
Copper alloy
tinned
OMNIMATE Signal – LSF-SMD | “PUSH IN” spring connection
LSF-SMD 5.00/../135
Reflow-compatible PCB terminal
Dimensioned drawing
Representative deratings curve
Product data
IEC: 500 V / 17.5 A / 0.2 - 1.5 mm²
UL: 300 V / 12 A / AWG 24 - 16
For additional articles and information, refer to
catalog.weidmueller.com
Note:
• Additional push button colours on request
• Rated current related to rated cross-section & min. No. of poles.
• Wire end ferrule without plastic collar to DIN 46228/1
• Operating force of slider max. 40 N
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed in
accordance with the relevant application standards.
• Crimping shape „A“ for wire end ferrules with PZ 6/5 crimping tool
are recommended for the largest cable sizes.
SMD
Ordering data
Solder pin length
Colour Black
Pitch 5.00 mm
Pol. L1 (inch) Qty. Order No.
2 5.00 0.197 210 1473690000
3 10.00 0.394 210 1473700000
4 15.00 0.591 210 1473710000
5 20.00 0.787 210 1473720000
6 25.00 0.984 210 1473740000
7 30.00 1.181 210 1473750000
8 35.00 1.378 210 1473760000
L1+4.2
L1+0.165"
L1
11.4
0.447"
3.4
0.132"
1.6
0.063"
3.4
0.134"
1.2
0.047"
9.5
0.374"
12.7
0.5"
14.45
0.569"
LSF-SMD 5.00/../180
PCB terminal for fully automatic assembly using reflow
soldering (SMD), with PUSH IN wire connections.
Conductor inserted and slider operated in same direction
(TOP).
• Solid wires& stranded wires with wire-end ferrules
need only to be inserted and they are ready.
• When connecting stranded wires without wire-end
ferrules the handling area is used to open the terminal
point
• Intuitive handling – since the wire-entry area and
handling area are clearly separated.
• Packaged in tape-on-reel
• Conductor outlet direction 180°
Technical data
Clamping range, max. mm²
Solid core H05(07) V-U mm²
Stranded H07 V-R
Flexible H05(07) V-K mm²
Flexible with ferrule mm²
Ferrule with plastic collar mm²
Stripping length mm
Screwdriver blade
According to norm
Tightening torque range Nm
Rated current, max. A
At ambient temperature
For conductor cross-section mm²
Overvoltage category
Pollution severity
Rated voltage V
Rated impulse voltage kV
UL / CUL (Use Group)
Rated voltage V
Rated current A
AWG conductor
CSA (Use Group)
Rated voltage V
Rated current A
AWG conductor
General data
Type of insulation material
UL 94 flammability rating
Contact base material
Material of contact surface
0.13...1.5
0.2...1.5
0.2...1.5
0.25...1.5
0.25...0.75
8
In compliance with IEC 60664-1 / IEC 61984
mm
AWG
AWG
17.5 17.5
20°C 40°C
1.5
III III II
3 2 2
250 320 500
4 4 4
B C D
300 300
12 10
24-16
B C D
300 300
10 10
24-16
LCP GF
V-0
Copper alloy
tinned
OMNIMATE Signal – LSF-SMD | “PUSH IN” spring connection
LSF-SMD 5.00/../180
Reflow-compatible PCB terminal
Dimensioned drawing
Representative deratings curve
Product data
IEC: 500 V / 17.5 A / 0.2 - 1.5 mm²
UL: 300 V / 12 A / AWG 24 - 16
For additional articles and information, refer to
catalog.weidmueller.com
Note:
• Additional push button colours on request
• Rated current related to rated cross-section & min. No. of poles.
• Wire end ferrule without plastic collar to DIN 46228/1
• Operating force of slider max. 40 N
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed in
accordance with the relevant application standards.
• Crimping shape „A“ for wire end ferrules with PZ 6/5 crimping tool
are recommended for the largest cable sizes.
11.4
0.447"
0.8
0.032"
3.4
0.132"
12.3
0.484"
max. 14
max. 0.551"
L1+4.2
L1+0.165"
8.5
0.335"
10.5
0.413"
L1
3.4
0.134"
1.6
0.063"
Ordering data
Solder pin length
Colour Black
Pitch 5.00 mm
Pol. L1 (inch) Qty. Order No.
2 5.00 0.197 180 1473560000
3 10.00 0.394 180 1473580000
4 15.00 0.591 180 1473610000
5 20.00 0.787 180 1473640000
6 25.00 0.984 180 1473660000
7 30.00 1.181 180 1473670000
8 35.00 1.378 180 1473680000
SMD
Accessories
Screwdriver
SDIS 0.4X2.5X75
SDS 0.4X2.5X75
Order No.
9008370000
9009030000
Accessories
Screwdriver
SDIS 0.4X2.5X75
SDS 0.4X2.5X75
Order No.
9008370000
9009030000
10 11