Brochure/Catalogue
LSF-SMD 3.50/180
PCB terminal for fully automatic assembly using reflow
soldering (SMD), with PUSH IN wire connections.
Conductor inserted and slider operated in same direction
(TOP).
• Solid wires& stranded wires with wire-end ferrules
need only to be inserted and they are ready.
• When connecting stranded wires without wire-end
ferrules the handling area is used to open the terminal
point
• Intuitive handling – since the wire-entry area and
handling area are clearly separated.
• Packaged in tape-on-reel
• Conductor outlet direction 180°
Technical data
Clamping range, max. mm²
Solid core H05(07) V-U mm²
Stranded H07 V-R
Flexible H05(07) V-K mm²
Flexible with ferrule mm²
Ferrule with plastic collar mm²
Stripping length mm
Screwdriver blade
According to norm
Tightening torque range Nm
Rated current, max. A
At ambient temperature
For conductor cross-section mm²
Overvoltage category
Pollution severity
Rated voltage V
Rated impulse voltage kV
UL / CUL (Use Group)
Rated voltage V
Rated current A
AWG conductor
CSA (Use Group)
Rated voltage V
Rated current A
AWG conductor
General data
Type of insulation material
UL 94 flammability rating
Contact base material
Material of contact surface
0.13...1.5
0.2...1.5
0.2...1.5
0.25...1.5
0.25...0.75
8
In compliance with IEC 60664-1 / IEC 61984
mm
AWG
AWG
17.5 17.5
20°C 40°C
1.5
III III II
3 2 2
160 160 320
2.5 2.5 2.5
B C D
300 300
12 10
24-16
B C D
300 300
10 10
24-16
LCP GF
V-0
Copper alloy
tinned
Product data
IEC: 320 V / 17.5 A / 0.2 - 1.5 mm²
UL: 300 V / 12 A / AWG 24 - 16
For additional articles and information, refer to
catalog.weidmueller.com
Note:
• Additional push button colours on request
• Rated current related to rated cross-section & min. No. of poles.
• Wire end ferrule without plastic collar to DIN 46228/1
• Operating force of slider max. 40 N
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed in
accordance with the relevant application standards.
• Crimping shape „A“ for wire end ferrules with PZ 6/5 crimping tool
are recommended for the largest cable sizes.
LSF-SMD 3.50/180
Reflow-compatible PCB terminal
Dimensioned drawing
14.7
0.579"
8.5
0.335"
10.3
0.406"
14.3
0.563"
0.8
0.032"
11.7
0.461"
11.4
0.447"
2.1
0.083"
3.4
0.132"
1.4
0.055"
Ordering data
Solder pin length
Colour Black
Pitch 3.50 mm
Pol. L1 (inch) Qty. Order No.
2 3.50 0.138 180 1250360000
3 7.00 0.276 180 1250370000
4 10.50 0.414 180 1250380000
5 14.00 0.552 180 1250390000
6 17.50 0.690 180 1250410000
7 21.00 0.828 180 1250420000
8 24.50 0.966 180 1250430000
9 28.00 1.104 180 1250440000
10 31.50 1.242 180 1250450000
11 35.00 1.380 180 1250460000
12 38.50 1.518 180 1250470000
Representative deratings curve
OMNIMATE Signal – LSF-SMD | “PUSH IN” spring connection
SMD
LSF-SMD 5.00/../90
PCB terminal for fully automatic assembly using reflow
soldering (SMD), with PUSH IN wire connections.
Conductor inserted and slider operated in same direction
(TOP).
• Solid wires& stranded wires with wire-end ferrules
need only to be inserted and they are ready.
• When connecting stranded wires without wire-end
ferrules the handling area is used to open the terminal
point
• Intuitive handling – since the wire-entry area and
handling area are clearly separated.
• Packaged in tape-on-reel
• Conductor outlet direction 90°
Technical data
Clamping range, max. mm²
Solid core H05(07) V-U mm²
Stranded H07 V-R
Flexible H05(07) V-K mm²
Flexible with ferrule mm²
Ferrule with plastic collar mm²
Stripping length mm
Screwdriver blade
According to norm
Tightening torque range Nm
Rated current, max. A
At ambient temperature
For conductor cross-section mm²
Overvoltage category
Pollution severity
Rated voltage V
Rated impulse voltage kV
UL / CUL (Use Group)
Rated voltage V
Rated current A
AWG conductor
CSA (Use Group)
Rated voltage V
Rated current A
AWG conductor
General data
Type of insulation material
UL 94 flammability rating
Contact base material
Material of contact surface
0.13...1.5
0.2...1.5
0.2...1.5
0.25...1.5
0.25...0.75
8
In compliance with IEC 60664-1 / IEC 61984
mm
AWG
AWG
17.5 17.5
20°C 40°C
1.5
III III II
3 2 2
250 320 500
4 4 4
B C D
300 300
12 10
24-16
B C D
300 300
10 10
24-16
LCP GF
V-0
Copper alloy
tinned
OMNIMATE Signal – LSF-SMD | “PUSH IN” spring connection
LSF-SMD 5.00/../90
Reflow-compatible PCB terminal
Dimensioned drawing
Representative deratings curve
Product data
IEC: 500 V / 17.5 A / 0.2 - 1.5 mm²
UL: 300 V / 12 A / AWG 24 - 16
For additional articles and information, refer to
catalog.weidmueller.com
Note:
• Additional push button colours on request
• Rated current related to rated cross-section & min. No. of poles.
• Wire end ferrule without plastic collar to DIN 46228/1
• Operating force of slider max. 40 N
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed in
accordance with the relevant application standards.
• Crimping shape „A“ for wire end ferrules with PZ 6/5 crimping tool
are recommended for the largest cable sizes.
SMD
Ordering data
Solder pin length
Colour Black
Pitch 5.00 mm
Pol. L1 (inch) Qty. Order No.
2 5.00 0.197 320 1473770000
3 10.00 0.394 320 1473780000
4 15.00 0.591 320 1473790000
5 20.00 0.787 320 1473800000
6 25.00 0.984 320 1473810000
7 30.00 1.181 320 1473820000
8 35.00 1.378 320 1473830000
L1+4.2
L1+0.165"
max. 14
max. 0.551"
12.3
0.484"
3.4
0.134"
11.85
0.467"
1.6
0.063"
5.25
0.207"
13.25
0.522"
8.5
0.335"
0.8
0.031"
Accessories
Screwdriver
SDIS 0.4X2.5X75
SDS 0.4X2.5X75
Order No.
9008370000
9009030000
Accessories
Screwdriver
SDIS 0.4X2.5X75
SDS 0.4X2.5X75
Order No.
9008370000
9009030000
8 9