Document of Conformity

ManualsBrandsWeidmueller ManualsConnectivityKLIPPON STB 1 SS E

This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document,

which is retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

Type Approval Certificate

This is to certify that the undernoted product(s) has/have been tested with satisfactory results in accordance with the

relevant requirements of the Lloyd’s Register Type Approval System.

This certificate is issued to:

PRODUCER

Weidmüller Interface GmbH & Co. KG

Klingenbergstraße 16

32758 Detmold

German

DESCRIPTION Stainless steel and mild steel enclosures

TYPES Klippon STB 1 SS & E

Klippon STB 1.1 SS & E

Klippon STB 2 SS & E

Klippon STB 2.1 SS & E

Klippon STB 3 SS & E

Klippon STB 4 SS & E

Klippon STB 5 SS & E

Klippon STB 6 SS & E

Klippon STB 1 MS HT

Klippon STB 1.1 MS HT

Klippon STB 2 MS HT

Klippon STB 2.1 MS HT

Klippon STB 3 MS HT

Klippon STB 4 MS HT

Klippon STB 5 MS HT

Klippon STB 6 MS HAT

APPLICATION Marine, offshore and industrial use

Certificate No. 08/20032 (E3)

Issue Date 30 November 2018

Expiry Date 24 June 2023

Sheet 1 of 2 Thorsten Wolff

Hamburg Technical Support Office

Lloyd’s Register EMEA

71 Fenchurch Street, London EC3M 4BS

Lloyd's Register EMEA

Is a subsidiary of Lloyd's Register Group

Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to

in this clause as the 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense

caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant

Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and

conditions set out in that contract.

LR031.1.2013.12

Lloyd's Register EMEA

Thorsten Wolff

Hamburg Technical Support Office

por

Off

ice

Summary of content (2 pages)

PAGE 1
Type Approval Certificate This is to certify that the undernoted product(s) has/have been tested with satisfactory results in accordance with the relevant requirements of the Lloyd’s Register Type Approval System. This certificate is issued to: PRODUCER Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 32758 Detmold Germany DESCRIPTION Stainless steel and mild steel enclosures TYPES Klippon STB 1 SS & E Klippon STB 1.1 SS & E Klippon STB 2 SS & E Klippon STB 2.
PAGE 2
ADDITIONAL TESTS Type Klippon STB x SS: degree of protection IP66/67 (IEC 60529) Type Klippon STB x MS HT: degree of protection IP66 (IEC 60529) SPECIFIED STANDARD DIN EN 62208 (06-2012) RATINGS Type Klippon STB 1 Klippon STB 1.1 Klippon STB 2 Klippon STB 2.