User Documentation

Wi-Fi device IE-WL-VL-AP-BR-CL Introduction
1-5
Console Port: RS-232 (RJ45-type)
Reset: Present
LED Indicators: PWR1, PWR2, PoE, FAULT, STATE, SIGNAL*, WLAN, LAN
*signal strength indicator
Alarm Contact (digital output): 1 relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs: 2 electrically isolated inputs
• +13 to +30 V for state “1”
• 3 to -30 V for state “0”
• Max. input current: 8 mA
Management
Device Management: WLAN Administration Tool, SNMP
Physical Characteristics
Housing: Metal, IP30 protection
Weight: 860 g (1.9 lb)
Dimensions: 52.7 x 135 x 105 mm (2.08 x 5.32 x 4.13 in)
Installation: DIN-rail mounting (standard), wall mounting (optional)
Environmental Limits
Operating Temperature:
• Standard Models: -25 to 60°C (-13 to 140°F)
• Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5% to 95% (non-condensing)
Power Requirements
Input Voltage: 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet Plus (IEEE 802.3af
compliant)
Input Current: 0.6 A @ 12 VDC;0.15 A @ 48 VDC
Connector: 10-pin removable terminal block, 500 V insulation
Power Consumption: 7.2 W
Reverse Polarity Protection: Present
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
Hazardous Location: UL/cUL Class I Division 2, ATEX Zone 2
EMC: EN 61000-6-2/6-4
EMI: CISPR 22, FCC Part 15B Class B
EMS:
• IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
• IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
• IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
• IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
• IEC 61000-4-6 CS: 3 V/m
• IEC 61000-4-8 PFMF: 1 A/m
Radio: EN 301 489-1/17, EN 300 328, EN 301 893, MIC, FCC ID SLE-WAPN008, KC, RCM
Note: Please check Weidmüller’s website for the most up-to-date certification status.
MTBF (mean time between failures)
Time: 570,854 hrs
Standard: Telcordia SR332
Warranty
Warranty Period: 5 years