User Documentation
Wi-Fi device IE-WL-VL-AP-BR-CL  Web Console Configuration 
3-48 
NOTE 
The recovery time for STP/RSTP in firmware version 1.6 is around 25 to 35 seconds. 
RSTP status 
This field will appear only when selected to operate STP/RSTP. It indicates whether this IE-WL-VL-AP-BR-CL is 
the Root of the Spanning Tree (the root is determined automatically) or not. 
Bridge priority 
Setting 
Description 
Factory Default 
Numerical value 
selected by user 
You can increase the bridge priority by selecting a lower 
number. A higher bridge priority brings a greater chance of 
being established as the root of the Spanning Tree topology. 
32768 
Hello time 
Setting 
Description 
Factory Default 
Numerical value input 
by user 
(1 – 10 seconds) 
The root of the Spanning Tree topology periodically sends out a 
“hello” message to other devices on the network to check if the 
topology is healthy. Hello time indicates how often the root 
sends hello messages. 
2 (seconds) 
Forwarding delay 
Setting 
Description 
Factory Default 
Numerical value input 
by user 
(4 to 30 seconds) 
The amount of time this device waits before checking to see if it 
should change to a different topology. 
15 (seconds) 
Max. age 
Setting 
Description 
Factory Default 
Numerical value input 
by user 
(6 to 40 seconds) 
As a non-root role, if the device has not received a hello 
message from the root longer than Max. age, it will reconfigure 
itself as a root. Once two or more devices on the network are 
recognized as a root, the devices will renegotiate to set up a 
new Spanning Tree topology. 
20 (seconds) 
Enable RSTP 
Setting 
Description 
Factory Default 
Enable/Disable 
Enables or disables the port as a node on the Spanning Tree 
topology. 
Disable (unchecked) 
Port priority 
Setting 
Description 
Factory Default 
Numerical value 
selected by user 
Increase this port’s priority as a node on the Spanning Tree 
topology by inputting a lower number. 
128 
Port cost 
Setting 
Description 
Factory Default 
Enable/Disable 
Input a higher cost to indicate that this port is less suitable as a 
node for the Spanning Tree topology 
2000000 










