User Documentation

Wi-Fi device IE-WL-VL-AP-BR-CL Introduction
1-6
ATTENTION
• For EXPLOSION-PROOF application, model IE-WL-VL-AP-BR-CL are designed and certified to meet ATEX
shall be mounted in a suitable enclosure rate to at least IP54 and Pollution Degree 2 as defined in EN60529
and used within its rated electrical and environmental ratings.
ATTENTION
• The IE-WL-VL-AP-BR-CL is NOT a portable mobile device and should be located at least 20 cm away from
the human body.
• The IE-WL-VL-AP-BR-CL is NOT designed for the general public. A well-trained technician should be
enlisted to ensure safe deployment of IE-WL-VL-AP-BR-CL units, and to establish a wireless network.
Functional Design
Device Ports
LED Indicators
The LEDs on the front panel of the IE-WL-VL-AP-BR-CL provide
a quick and easy means of determining the current operational
status and wireless settings.
The FAULT LED indicates system failures and user-configured
events. If the IE-WL-VL-AP-BR-CL cannot retrieve the IP
address from a DHCP server, the FAULT LED will blink at half
second intervals. The SIGNAL LEDs indicate signal strength,
and only operate in Client mode.
RJ45 Ethernet port (10/100/1000 BaseTX)
Serial (RS232) configuration console port
(to be used with attached serial/RJ45 cable)
Fault LED
Signal
strength
LEDs