Document of Conformity

ManualsBrandsWeidmueller ManualsAutomation & SoftwareIE-WLT-VL-AP-BR-CL-EU

00-IC-F0060-1 – Issue 14.0

This certificate may only be reproduced in its entirety and without any change, schedule included. Page 1 of 2

[1] TYPE EXAMINATION CERTIFICATE



[2] Equipment or Protective System intended for use

in Potentially Explosive Atmospheres

Directive 2014/34/EU

[3] Type Examination Certificate Number: DEMKO 18 ATEX 2045X Rev. 0

[4] Product: Industrial wireless Access Point, Models IE-WL-VL-AP-BR-CL-US, IE-WL-VL-AP-BR-CL-EU, IE-WLT-

VL-AP-BR-CL-US, IE-WLT-VL-AP-BR-CL-EU

[5] Manufacturer: Weidmueller Interface GmbH & Co. KG

[6] Address: Klingenbergstrasse 16, 32758 Detmold, Germany

[7] This equipment and any acceptable variation thereto is specified in the schedule to this certificate and the documents therein referred to.

[8] UL International Demko A/S certifies that this product has been found to comply with the Essential Health and Safety Requirements relating to

the design and construction of products intended for use in potentially explosive atmospheres given in Annex II to Directive 2014/34/EU of the

European Parliament and of the Council, dated 26 February 2014.

The examination and test results are recorded in confidential report no.

4788364546.1.1

[9] Compliance with the Essential Health and Safety Requirements, with the exception of those listed in the schedule of this certificate, has been

assessed by reference to Standards:

EN 60079-0:2012+A11:2013 EN 60079-15:2010

[10] If the sign "X" is placed after the certificate number, it indicates that the product is subject to the Specific Conditions of Use specified in the

schedule to this certificate.

[11] This Type examination certificate relates only to the design of the specified product, and not to specific items of product subsequently

manufactured.

[12] The marking of the product shall include the following:

 II 3 G Ex nA IIC T4 Gc

Certification Manager

Jan-

Erik Storgaard

This is to certify that the sample(s) of the

Product described herein (“Certified Product”) has been investigated

and found in compliance with the Standard(s) indicated on this Certificate, in accordance with the ATEX

Product

Certification Program Requirements. This certificate and test results obta

ined apply only to the product

sample(s) submitted by the

Manufacturer. UL did not select the sample(s) or determine whether the sample(s)

provided were representative of other manufactured

product. UL has not established Follow-Up Service or other

survei

llance of the product. The Manufacturer is solely and fully responsible for conformity of all product to all

applicable Standards, specifications, requirements or Directives. The test results may not be used, in whole or in

part, in any other document without UL’s prior written approval.

Date of issue:

2018-04-30

Certification Body

UL International Demko A/S, Borupvang 5A, 2750 Ballerup, Denmark

Tel. +45 44 85 65 65,

info.dk@ul.com, www.ul.com

Summary of content (2 pages)

PAGE 1
TYPE EXAMINATION CERTIFICATE [1]  Equipment or Protective System intended for use in Potentially Explosive Atmospheres Directive 2014/34/EU [2] [3] Type Examination Certificate Number: DEMKO 18 ATEX 2045X Rev.
PAGE 2
Schedule TYPE EXAMINATION CERTIFICATE No. [13] [14] DEMKO 18 ATEX 2045X Rev. 0 [15] Description of Equipment: Models IE-WL-VL-AP-BR-CL-US, IE-WL-VL-AP-BR-CL-EU, IE-WLT-VL-AP-BR-CL-US, IE-WLT-VL-AP-BR-CL-EU is Industrial Wireless Access Point that are evaluated as open-type devices. They are indented for installation into an ultimate enclosure and can be installed either by DIN-Rail mounting or Wall mounting. The ultimate enclosure must be use a tool removable door or cover.