User Documentation

Wi-Fi device IE-WL-BL-AP-CL Web Console Configuration
3-57
After you lick on Save Configuration in the left menu box, the following screen is displayed. Click Save if you
want to update the configuration settings in the flash memory at this time. Alternatively, you can choose to run
other functions and put off saving the configuration until later. However, the new setting changes will remain
in the non-volatile memory until you save the configurations.
Restart
You must restart the device for any changes in the configuration setting to take effect. If you have submitted
configuration changes, you will find a blinking string in the upper right corner of the configuration screen. After
making all your configuration changes, click the Restart function in the left menu box.
If you made changes recently but did not save, you will be given two options. Clicking the Restart button here
will reboot the IE-WL-BL-AP-CL directly, and all setting changes will be ignored. Clicking the Save and Restart
button will apply all changes and then reboot the IE-WL-BL-AP-CL.
If you run the Restart function without changing any configurations or saving all your changes, you will see
just one Restart button on your screen.